CoMn@NC催化5-羟甲基糠醛常压氧化为2, 5-呋喃二甲酸二甲酯

Dimethyl furan-2, 5-dicarboxylate (DMFDCA) is a valuable biomass-derived chemical that is an ideal alternative to fossil-derived terephthalic acid as a monomer for polymers. The one-step oxidation of 5-hydroxymethylfurfural (HMF) to DMFDCA is of practical significance. It not only shortens the reaction pathway but also avoids the separation process of intermediates; thus, reducing cost. In this work, non-noble bimetallic catalysts supported on N-doped porous carbon (CoMn@NC) were synthesized via a one-step co-pyrolysis procedure using different pyrolysis temperatures and proportions of metal precursors and additives. We employed the prepared CoMn@NC catalysts in the aerobic oxidation of HMF under mild reaction conditions to obtain DMFDCA. High-yield DMFDCA was obtained by screening the prepared catalysts and optimizing the reaction conditions, including the strength and amount of the base, as well as the reaction temperature. The optimized yield of DMFDCA was 85% over the Co₃Mn₂@NC-800 catalyst after 12 h at 50 ℃ using ambient-pressure oxygen. The physicochemical properties of the catalysts were determined using a variety of characterization techniques, the factors affecting the performance of each catalyst were investigated, and the relationship between the physicochemical properties and performance of the prepared catalysts was elucidated. A porous structure with a high surface area had a positive effect on mass transfer efficiency. Cobalt nanoparticles (NPs) and atomically dispersed Mn were coordinated to N-doped carbon to form M―N_x (where M = Co or Mn). Based on the Mott-Schottky effect, there was significant electron transfer between each metal and the N-doped carbon, additionally, the metal NPs supplied electrons to the carbon atoms. The electron-deficient metal site in the pyridinic N-rich carbon was beneficial for the activation of HMF and oxygen. The activation of oxygen produced reactive oxygen species (such as superoxide radical anions) to ensure high selectivity to DMFDCA through dehydrogenative oxidation of the hemiacetal intermediate and hydroxymethyl group of 5-hydroxymethyl-2-methyl-furoate. The existence of disordered and defective carbons increased the number of active sites. Subsequently, we performed a series of control experiments. Based on our current experimental results and previous studies, we propose a simple mechanism for the aerobic oxidation of HMF to DMFDCA. The catalyst was stable, its performance decreased slightly after two cycles, and it was tolerant to SCN⁻ ions and resistant against N or S poisoning. Furthermore, the use of this catalytic system can be expanded to various substituted aromatic alcohols, such as benzyl alcohols with different substituents, furfuryl alcohol, and heterocyclic alcohols. Simultaneously, the product type was further extended from methyl esters to ethyl esters with a high yield when the substrate reacted with ethanol. In conclusion, this catalytic system can be applied in the production of carboxylic esters for polymers.     

锰离子氧化沉淀法实现锂离子电池LiNi0.8Co0.05Mn0.15O2材料的回收和利用

以浓盐酸为浸出剂,以NaOH和NH₄HCO₃为沉淀剂,利用Mn²⁺在碱性条件下的氧化反应改变离子的沉淀次序进而分步回收的方案,探究了浓盐酸酸浸处理三元正极材料LiNi_0.8Co_0.05Mn_0.15O₂的最佳条件。在分步沉淀过程中,Mn²⁺被氧化为不溶于非还原性酸的MnO （OH）₂,并在酸性条件下回收。Ni、Co则在碱性条件下利用NaOH回收,而Li则利用NH₄HCO₃回收。该方法中Mn的回收率达到85.1%,产品纯度达到98.6%; Li的回收率达到95.0%,产品纯度达到99.3%。由回收材料重新合成的三元正极组装的软包电池的首圈放电比容量达到了175 mAh·g^-1,可以以超过99.5%的库仑效率稳定循环50圈。     

A Photoelectrochemical Sensor for Firstly the Detection of Amlodipine Besylate Based on an MnC4Pc Coated ZnO Composite Materials

In this study, tetracarboxylic manganese phthalocyanine coated nano-zinc oxide (MnC₄Pc-ZnO) composite material was prepared by in-situ growth method and modified with indium tin oxide (ITO) glass electrode to construct a photoelectrochemical (PEC) sensor. A PEC sensor for the determination of amlodipine besylate (AB) was developed for the first time based on the principle of precipitation reaction between heavy metal ions and dihydropyridine and the recombination suppression effect of the material. The morphology and optical properties of the MnC₄Pc-ZnO composites were characterized by scanning electron microscopy (SEM) and ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS). Chronoamperometry (i-t) and electrochemical impedance spectroscopy (EIS) were used to study the PEC behavior of ITO electrodes modified by MnC₄Pc-ZnO composite material. The study found that the MnC₄Pc-ZnO composite material has a good photocurrent response to AB, and there was a good linear relationship between the concentration range of 75 nM-250 μM, the linear equation was I(μA)=−5.2×10⁻⁸×lgC+3.2×10⁻⁸ (r=0.9947), a limit of detection (LOD) of 20 nM. In addition, MnC₄Pc-ZnO/ITO also has good selectivity and stability. The PEC sensor detects amlodipine besylate tablets, amlodipine besylate dispersible tablets, and biological samples, with standard addition recovery rates of 96.11 % and 103.96 %, respectively. The determination result has good accuracy, and the PEC sensor provides a new method for detecting AB.     

A Series of Low-Coordinate Iron Selenido Complexes: Reactivity of a Linear Iron(I) Silylamide towards Selenium

A variety of different low-coordinate iron selenide complexes is reported. These are obtained by reaction of the linear iron(I) silylamide K{18c6}[Fe(N(Dipp)SiMe₃)₂] (Dipp=2,6-diisopropylphenyl) with red selenium. Careful adjustment of the reaction conditions results in the formation of unique low-coordinate selenido iron complexes, namely a monoselenide bridged [2Fe−1Se]²⁺ complex, as well as mononuclear iron per- and triselenides. Further, C−H bond activation of one of the silylamide ligands by a putative terminal iron monoselenide is observed.     

无机固态材料中气体元素分析的现状与进展

本文介绍了气体元素分析样品表面处理的最新研究成果,综述了热导法、红外吸收法、库仑滴定法、飞行时间质谱法和火花源原子发射光谱法等分析方法在无机固态材料气体分析中的应用现状,分析了各自的特点及存在的问题,并展望了气体分析的发展方向(引用文献85篇)。     

元素分析仪测定土壤、沉积物样品碳氮含量的影响因素及数据校正

使用元素分析仪进行土壤、沉积物样品碳、氮含量检测时,样品前处理过程(烘干和酸化)、包样质量以及参考标准品等因素均会对检测结果造成影响.试验结果表明:酸化导致氮百分质量的测定结果降低2.6%~40.0%,碳百分质量的测定受包样质量的影响较大,使用的校正标准与被测样品越相似,校正结果越准确.     

Recycling Application of Li–MnO2 Batteries as Rechargeable Lithium–Air Batteries

The ever‐increasing consumption of a huge quantity of lithium batteries, for example, Li–MnO₂ cells, raises critical concern about their recycling. We demonstrate herein that decayed Li–MnO₂ cells can be further utilized as rechargeable lithium–air cells with admitted oxygen. We further investigated the effects of lithiated manganese dioxide on the electrocatalytic properties of oxygen‐reduction and oxygen‐evolution reactions (ORR/OER). The catalytic activity was found to be correlated with the composition of Li_xMnO₂ electrodes (0<x<1) generated in situ in aprotic Li–MnO₂ cells owing to tuning of the Mn valence and electronic structure. In particular, modestly lithiated Li_0.50MnO₂ exhibited superior performance with enhanced round‐trip efficiency (ca. 76 %), high cycling ability (190 cycles), and high discharge capacity (10 823 mA h g_carbon^?1). The results indicate that the use of depleted Li–MnO₂ batteries can be prolonged by their application as rechargeable lithium–air batteries.     

Generating and Trapping Metalla‐N‐Heterocyclic Carbenes

By means of a combined experimental and theoretical approach, the electronic features and chemical behavior of metalla‐N‐heterocyclic carbenes (MNHCs, N‐heterocyclic carbenes containing a metal atom within the heterocyclic skeleton) have been established and compared with those of classical NHCs. MNHCs are strongly basic (proton affinity and pK_a values around 290 kcal mol^?1 and 36, respectively) with a narrow singlet–triplet gap (around 23 kcal mol^?1). MNHCs can be generated from the corresponding metalla‐imidazolium salts and trapped by addition of transition‐metal complexes affording the corresponding heterodimetallic dicarbene derivatives, which can serve as carbene transfer agents.     

Manganese‐Catalyzed Synthesis of cis‐β‐Amino Acid Esters through Organometallic CH Activation of Ketimines

Manganese‐catalyzed C? H functionalization reactions of ketimines set the stage for the expedient synthesis of cis‐β‐amino acid esters through site‐ and regioselective alkene annulations. The organometallic C? H activation occurred efficiently with high functional group tolerance, delivering densely functionalized β‐amino acid derivatives with ample scope.     

Synthesis,Crystal Structure,Fluorescence, Thermal Stability and Magnetic Properties of the Dinuclear Manganese(Ⅱ) Complex [Mn_2(L)_2(2,2'-bipy)_2(H_2O)_5]_2·3H_2O

A new dinuclear manganese complex [Mn2(L)2(2,2'-bipy)2(H2O)5]2·3H2O has been synthesized with Mn SO4·H2O, 2,2'-bibenzoic acid(H2L) and 2,2'-bipyridine(2,2'-bipy) in the mixed solvent ethanol and water. It crystallizes in monoclinic, space group P1 with a = 9.9944(10), b = 21.939(2), c = 25.628(3) ?, α = 108.429(3), β = 100.613(4), γ = 102.821(3)o, V = 4997.9(9) ?3, Dc = 1.355 g/cm3, Z = 2, F(000) = 2108, GOOF = 1.074, the R = 0.0626 and w R = 0.1531. The structure of the complex contains two [Mn2(L)2(2,2'-bipy)2] units, ten coordinated H2 O molecules and three uncoordinated H2 O molecules. The fluorescence, thermal stability and magnetic properties of the complex were investigated.